We've found 69 Gage Designer jobs!

... - Safety Specialist/HR Generalist TEAM Industries - Bagley - Designer II - Manufacturing Engineer - Supplier Quality Engineer TEAM ... gauging and participate in continuous improvement activities and gage design. * Knowledge of Quality System processes and ...

... of direct experience. An active DOD secret clearance is mandatory. Preferred experience includes electrical design, strain gage installation, mechanical design/packaging, and software development. Also, experience with data processing, data reduction, ...

... manufacturing and quality processes. 25% - Initiates and analyzes Tool Gage Inspection Report to verify Special Design Tooling meets design ... affect timely recall of tooling and gages. 10% - Designs gage tools and cutting tools when needed. Qualifications: ...

... Material Review Board (MRB) o Fabrication - Tooling Certification, Gage Plans, Gage R&R, Validation Support o Vendor Management - ... thorough and robust outcomes and enforce quality compliance (ex: Gage plans, FA, etc) * Lead Quality centric problem solving ...

Job Code :401 Division :Thermal Structures Location :Indianapolis IN US 46278 % of Travel Required :0-10% Job Type :Full Time Career Level :Experienced (Non-Manager) Education :High School or equivalent Skill :Engineering ->Process/Process Control ...

Inspector 3 Job ID: 5505 # Positions: 1 Location: US-CA-Vernon Experience (Years): 5 Zip: 90058 Posted Date: 2/26/2010 Category: Inspector/Test - Other More information about this job: Job Overview: Under minimal supervision, performs complex inspection ...

... to company's specifications and standards. Facilitate the completion of gage R&R studies per the AIAG Measurements Systems Analysis handbook. Audit gage calibration requirements and adhere to those requirements Perform containment ...

... process controls * Specify which preventative and detective controls are required, and communicate to vendors * Verify gage repeatability, reproducibility, and accuracy, and address deficiencies * Develop and document the inspection methods * Develop the ...

located in Rockford, Illinois is a world class designer and manufacturer of high performance, reliable... Process Capability, PFMEA, Gage R&R, etc.). Thorough...

Tool and Fixture DesignerFunction: The Tool and Fixture Designer creates tooling, fixtures, jigs, and gages for the most economical assembly and test of Company products. Effective design activity occurs through collaboration with the Engineers, Tool Room, ...

... tools; Uses gages such as electronic height gages, indicators, super-micrometers, optical comparators, optical gages, vernier calipers, gage blocks, etc.. 6) Knowledge of Metals; knowledge of processes to harden, anneal and relieve stress on metals and ...

... layout / measuring devices besides CMM * Experience in supervising wage employees in measurement/metrology operations * Capability studies * Gage Repeatability & Reproducibility (R&R) * Six sigma black belt training What You'll get We offer a comprehensive ...

... unique applications. * Training & Certify production test personnel. * Run Gage R&R studies on production test equipment. * Interface ... experience. * Strong Mechanical aptitude. * Solid Works * Knowledge of Gage R&R. * Understanding of GD&T, wiring and ...

Jr. Development EngineerFiling Deadline:Wed 8/11/2010STRUCTURAL SYSTEM FACILITY (100% Career)Hiring Salary Range: $2,938 - $4,053 /month Payroll Title: Jr. Development Engineer. Full Salary Range: $2,938 - $5,168 /month UCSD Layoff from Career appointment ...

... programming is beneficial. Must have working knowledge of mechanical inspection equipment including, but not limited to: calipers, micrometers, height gage, thread gages, and inspection pins. Type: CONTRACT Duration: 0 - 30 Days Payrate: 16.00 - 21.00 ...

... is beneficial. Must have working knowledge of mechanical inspection equipment including, but not limited to: calipers, micrometers, height gage, thread gages, and inspection pins. Previous Graphite experience would be a plus!!! Type: CONTRACT Duration: 60 ...

... , extracting, compiling, and presenting geological or hydrologic data in prescribed tabular or graphic form; 3) Computing mean daily gage heights from water stage record charts, editing record tapes, and making corrections based on field notes. For ...

Job Title: Precision Calibration and Measurement Inspector Department: Department Of The Army Agency: Army Tank-Automotive & Armament Command, Army Materiel Command Job Announcement Number: NCBG10342611 Salary Range: $28.25 - $32.92 /hour Series & Grade: ...

... of testing including: room/elevated temperature HCF, SPATE, strain gage response, laser vibrometry, holography, engine shake rig, ... to, test rig assembly, test-stand preparation, strain gage / thermocouple installation, program planning, data system set-up/ ...

... such as IMD, IML, painting, pad printing, VM, NCVM, etc. * Knowledge in Production Part Approval Process (PPAP - gage R&R, FAI, cpk, control plan). * Familiarity with tolerance stack up, Computational Fluid Dynamics (CFD), and structural analysis. * ...

... in Product Qualification Testing * 5 years Product development experience * Knowledge of electro-mechanical products * Knowledge in: MSA, Gage R&R, DFMEA, DOE, MTBF, SPC * Thorough understanding of engineering drawings/documents * Highly analytical, data ...

... of competence in Quality Technology including statistical techniques and six sigma tools including sampling plans, process capability analysis, gage R&R, hypothesis testing, analysis of variance, regression, and design of experiments *Applied knowledge of ...

... preferred * Ability to read and interpret product specifications and schematics. * General knowledge of measurement principles such as gage accuracy, precision, bias, offset, linearity, calibration, GR&R, etc. * Analytical skills to be able to interpret ...

... necessary to assist in trouble shooting processes, materials, and design related problems. Develop test, inspection, gage, and information equipment to meet predetermined specifications.Capability studies, tolerance issues, product standards evaluation, ...

... protractor and tape measures where large distances still require high level of accuracy SS Understand basic electrical connector pinning and strain gage type instrumentation SS Ability to read and interpret drawings both in hard copy and in electronic form

... proper transducer installations. * Candidate must have a min of 5 years of experience and proficient in strain gage and instrumentation installation on metallic and composite structures used for static, fatigue and flight testing of aircraft structures. * ...

Systems Engineering-Instrumentation & Test Job ID: 2010-1512 Posted Date: 4/2/2010 Apply to this Opportunity: Interested in this opportunity? * Apply Now!Insitu is a leading high-tech autonomous systems company driven by a culture of agility and ...

... control. * Knowledge of Quality Assurance processes * Knowledge of statistical and six-sigma methodologies. * Experience in process capability studies; Gage R & R * High level of energy, enthusiasm and optimism, as well as a sense of urgency and passion ...

... : Susanne Forman Phone: 785-350-4618 Email: susanne.forman@va.gov Agency Information: Department Of Veterans Affairs 2200 SW Gage Boulevard Topeka, KS 66622 US What To Expect Next: Once your complete application is received we will conduct an evaluation of ...

SUMMARY: Under supervision, receives general instructions about required tasks and results expected.Work is usually well defined and is checked for progress and reviewed for accuracy upon completion.ESSENTIAL DUTIES AND RESPONSIBILITIES (include the ...

... level skills with Minitab such as Confidence intervals, hypothesis testing, t-tests, etc., Regression, Analysis of Variance, Gage R&R, Histograms and Pareto Charts, Control Charts, Capability calculations, uses of various distributions, and Factorial DOE ...

... : Susanne Forman Phone: 785-350-4618 Email: susanne.forman@va.gov Agency Information: Department Of Veterans Affairs 2200 SW Gage Boulevard Topeka, KS 66622 US What To Expect Next: Once your complete application is received we will conduct an evaluation of ...

... : Susanne Forman Phone: 785-350-4618 Email: susanne.forman@va.gov Agency Information: Department Of Veterans Affairs 2200 SW Gage Boulevard Topeka, KS 66622 US What To Expect Next: Once your complete application is received we will conduct an evaluation of ...

... : Susanne Forman Phone: 785-350-4618 Email: susanne.forman@va.gov Agency Information: Department Of Veterans Affairs 2200 SW Gage Boulevard Topeka, KS 66622 US What To Expect Next: Once your complete application is received we will conduct an evaluation of ...

... manufacturing operation in the areas of processes, new product implementation, CNC programming, machinery and tool/gage acquisition, layout, scrap tool management, continuous improvement methodologies and other operational issues. Responsibilities: * ...

... of applicable cost methods, perform "What-If" exercises, be able to analyze previously accomplished estimates, understand and gage the executability of a program and provide cost model design, development and/or maintainence. Compiling/reviewing all tasks ...

... of applicable cost methods, perform "What-If" exercises, be able to analyze previously accomplished estimates, understand and gage the executability of a program and provide cost model design, development and/or maintainence. Compiling/reviewing all tasks ...

... Actions for internal and external issues. . Identifies cross-training opportunities between lab, inspection, NDT and gage issuance personnel. Implements training and monitors compliance following training. . Oversees the calibration, maintenance and ...

... SOPs, protocols, reports and analyzing data (required). Experienced in coordinating and executing validation studies (process, equipment, gage R&R) and DOE studies (required). Mechanical design capabilities in the areas of engineering drawing reviews and ...

Job Details Job Title: Sr. Quality Assurance Engineer Location: Huntsville, AL Overview: The QA Engineer is responsible for the technical & QA support of all aspects the job functions listed: Design/install QA control processes, sampling systems, ...

... design meets system level and component level criteria. - Perform component validations from test data (e.g., strain-gage, non-interference stress measurements, etc).- Provides technical leadership and mentoring to less experienced structural analysts.- ...

... : Susanne Forman Phone: 785-350-4618 Email: susanne.forman@va.gov Agency Information: Department Of Veterans Affairs 2200 SW Gage Boulevard Topeka, KS 66622 US What To Expect Next: Once your complete application is received we will conduct an evaluation of ...

... : Susanne Forman Phone: 785-350-4618 Email: susanne.forman@va.gov Agency Information: Department Of Veterans Affairs 2200 SW Gage Boulevard Topeka, KS 66622 US What To Expect Next: Once your complete application is received we will conduct an evaluation of ...

... : Susanne Forman Phone: 785-350-4618 Email: susanne.forman@va.gov Agency Information: Department Of Veterans Affairs 2200 SW Gage Boulevard Topeka, KS 66622 US What To Expect Next: Once your complete application is received we will conduct an evaluation of ...

... : Susanne Forman Phone: 785-350-4618 Email: susanne.forman@va.gov Agency Information: Department Of Veterans Affairs 2200 SW Gage Boulevard Topeka, KS 66622 US What To Expect Next: Once your complete application is received we will conduct an evaluation of ...

Precision Inspector -CMM (2nd shift) Location: Los Angeles - Headquarters Job Code: QAD Current Quantity: 1 Description Our rapid growth has created an opportunity for a Precision PartsInspector(1st& 2ndShift) to support the design and production of our ...

Precision Inspector - CMM (1st Shift) Location: Los Angeles - Headquarters Job Code: QAD Current Quantity: 1 Description Our rapid growth has created an opportunity for a Precision PartsInspector(1st& 2ndShift) to support the design and production of our ...

... the flexibility and product knowledge required to support all other Quality Assurance activities.*Develops and writes work, gage and packaging instructions.*Maintains customer satisfaction by meeting the customer's requirements of a quality product. ...

Tool Crib & Production Attendant Job Type: Full-Time Location: Escondido, CA Post Date: 03/24/2010 Job Description: SUMMARY Receives, stores and issues hand tools, machine tools, dies, drills, materials, equipment, etc., in an industrial establishment. ...

... structured problem solving skills (such as DMAIC). * Specific knowledge of Measurement System Analysis (MSA-GRR, Correlation, Gage Management, etc.) * Experience in use of standard Statisitical Quality Sampling Methods * Ability to create and manage ...

... , ASL3000 and AeroFlex test platforms, and Eletroglas 4090 probers. * Thorough understanding and demonstrated application of MSA (i.e. Gage R&R, ANOVA) and other statistical tools/methods. * Mature skills using data analysis tools such as Jump, Minitab, ...

Job Code :399 Division :Thermal Structures Location :Indianapolis IN US 46278 % of Travel Required :0-10% Job Type :Full Time Career Level :Experienced (Non-Manager) Education :High School or equivalent Skill :Engineering ->Process/Process Control ...

Inspector 4 Job ID: 4929 # Positions: 1 Location: US-CA-Vernon Experience (Years): 5 Zip: 90058 Posted Date: 6/2/2009 Category: Quality, Product Assurance & Test - Other More information about this job: Job Overview: Under minimal supervision, performs ...

AUTOMOTIVE OPERATIONS ASSOCIATE ASSEMBLY II Location: US-NC-GREENSBORO Requisition ID: 2010-20787 Alternative Work Site: .. Posted Date: 6/30/2010 ITAR : No Apply for this Career Opportunity: Interested in this opportunity? * Apply for this opportunity ...

OPERATIONS ASSOCIATE ASSEMBLY IV Location: US-NC-GREENSBORO Requisition ID: 2010-21181 Alternative Work Site: .. Posted Date: 7/2/2010 ITAR : No Apply for this Career Opportunity: Interested in this opportunity? * Apply for this opportunity now! * Loginto ...

Evaluate existing processes for continuous improvement.Develop welding techniques and procedures per TACOM 12479550. Prepare all WPS and PQR documentation to support process.Create quality system for maintaining process per ISO standards and Military ...

... reports. May categorize complaints in accordance with Corporate or Divisional guidelines. May Supervise Quality Engineers or Gage Lab Technicians.MINIMUM QUALIFICATIONSA Bachelors degree in mechanical engineering or a related engineering filed and five ...

Job Title: Lock and Dam Operator Department: Department Of The Army Agency: Army Corps of Engineers Job Announcement Number: SWGG10323579 Salary Range: $24.52 - $28.63 /hour Series & Grade: WY-5426-09/09 Open Period: Monday, July 19, 2010 to Friday, July ...

Job Code :6625 Division :Parker Hannifin Location :Washington MO US 63090 Job Type :Full Time Career Level :Manager (Manager/Supervisor of Staff) Education :Bachelor's Degree Skill :Accounting ->Cash Management Category :Engineering Job Description : ...